Deck Sealants are Worth the Trouble

If you are wondering why you can’t use just any finish on your deck, think about the abuse decking must handle, in­cluding pounding rain, snow, and ice, abrasion from traffic and furniture, and often many hours of direct sun, day after day. To make matters worse, the joints between the many parts of a deck retain moisture long after the rain stops, making the wood vulnerable to rot, mildew, and wood-munching insects. To combat this barrage, deck-fin­ish manufacturers offer a variety of formulations that in­clude sealers, preservatives, UV-light inhibitors, pigments, and resins. Some are oil based and penetrating. Some are acrylic and film forming. Others are a mix. Here is a list of the most popular finishing options for a new deck:

Clear sealers, or water-repellent preservatives, are the most popular choice for new decks. They help protect wood from moisture, thereby saving it from repeated cycles of soaking up water and then drying out. Unprotected, wood will crack, warp, cup and splinter. Sealers must be reapplied regularly to remain effective then; the wood will weather to gray. Water- repellent preservatives contain a fungicide to fight mildew.

Toners, or transparent stains, offer more than clear sealers. They deepen and enhance the wood, and the grain remains visible. You can use finishes on pressure-treated wood to approximate the look of more expensive woods. The best products in this category penetrate the wood surface, protect it from UV light and mildew, and leave a substantial top layer to resist moisture. They are relatively expensive finishes but will retain the original color of most woods strictly according to the manufacturer’s directions.  Note: Exotic hardwoods like Ipe or mahogany are dense with natural oils and don’t absorb penetrating stains as well as softer woods. Allow them to weather to a teak-like gray or treat them with a hardwood-specific finish according to the manufacturer’s recommendations to maintain the original wood color.

Semitransparent stains generally have more pigment than transparent stains and do a better job of hiding imperfections and unattractive grain patterns. Alkyd- and oil-based versions excel because they penetrate the wood better than acrylic formulations. All are available in a wide variety of wood tones and colors.

Solid stains are more heavily pigmented than semitrans­parent stains. (Think thinned paint.) They offer superior protection against UV rays and hide the color and grain of the wood. They, too, come in a wide variety of colors. Oil-based products usually last longer, but water-based formu­las are easier to clean. Expect wear patterns to show in heavily-trafficked areas.

Deck and porch paints, unlike many stains, are film-forming products. This makes for superior UV and mois­ture protection, and is great for camouflaging lesser grades of lumber—but paint may blister and peel, and will even­tually show wear in high-traffic areas. Use paint if you want a bright gloss or semi gloss finish to match or complement paint on your house exterior. Acrylic- and alkyd-based paints are available and should be applied over an oil-based primer. Mix the paint with clean sand to improve slip re­sistance if desired. Keep painted decks swept free of dirt (it wears finishes away faster), or place outdoor carpets along traffic paths to prevent wear. Sand and recoat as necessary.

Preservatives prevent fungal growth, rot, and decay— and some also protect against wood-boring insects. They are recommended for treating untreated wood as well as the site-cut ends of pressure-treated lumber. Preservatives alone are not finishes. They may, however, be sold in com­bination with sealers to provide moisture protection as well, making them a one-step finish. Some preservatives can be used prior to applying paint for added protection against rot and decay.

Apply one thin coat of finish to penetrate and dry completely. Thick layers of finish don’t penetrate nor dry completely. The wood should be dry before applying finish. Sprinkle a little water on the deck. If it soaks in immediately, the wood is dry enough for finish application. New pressure-treated lumber must dry out completely before finish is applied. Check with the lumber supplier for the proper amount of drying time.

Make sure whatever finish you apply is rated for outdoor use and for a deck surface. Follow manufacturer’s application instructions for best results. And don’t spray or paint yourself into a corner.

Use a deck brightener to clean a deck before applying new finish (page 184). A brightener removes dirt, mildew, and the top layer of sun-faded wood fibers to restore the natural color of cedar and redwood.

Reapply finish to decks approximately once a year. Harsh climates and heavy deck usage may require reapplication twice a year.

Designing and Planning Your Deck

Decks are the least expensive way to add square feet to your living space. They are relatively straightforward o build and don’t require elaborate foundations, and adding one won’t interfere with your day-to-day routine nearly as much as a kitchen remodeling. Because of their simplicity, however, many homeowners and builders don’t stop to consider all the possibilities that decks can offer. With a little forethought, they can be a lot more than rectangles with guardrails.

The Many Uses for a Deck
Decks can be places to cook and en­tertain, soak in a spa, gaze into a fire, exercise a green thumb, or sunbathe. They can be made comfortable— with protection from sun, wind, rain, and bugs—and private, too. In addi­tion, decks can feature structures such as screened rooms, gazebos, per­golas, and trellises. Decks can even help you save money on cooling bills if built to shade a lower level. Best of all, an upgraded deck does not need to cost a lot more than a bare-bones one. Good ideas and advice for decks and patios will help you get the most from the deck addition you’re planning for your home.

To design anything, you must gather all the bits and pieces you’d like to include and then try to put them together in a coherent and elegant way. Desks are no exception. You’ll want to know where the sun passes over your property in the summer, which architectural elements to borrow to help the deck blend with your home and much more.

One way to gather the pieces is the scrapbook approach. Clip photos of deck you like from home design magazines, and then hand them over to a designer or builder and say, “I want something like this.”  However, it is well worth the effort to go one step further and look at all the op­tions an architect would. By taking the time to consider all the angles, you will end up with a deck that per­fectly suits your home and lifestyle. Successful deck design is about seeing all the possibilities. We’ve identified those that the most important by focusing on the fundamental deck design principles. It will help you envision key aspects of your deck, such as where to put it, how big to make it, and what height and shape it should be. It also addresses key concerns, such as material selection and safety.

Take the time to plan and design your deck carefully.  Consider how you will use your outdoor spaces.  Do you plan to barbeque on the deck?  Would a hot tub be a relaxing addition?  Will large groups of people gather on the deck for parties? Make certain the deck design meets as many of your desires as possible, and if you plan to add elements such as a spa in the future, make the structure strong enough now to save you extra work in the future.  Read and research enough books and articles on the Internet to help you find just the right design idea for you and your lifestyle.

A good initial plan will make your deck building project as easy and stress free as possible.  Plus careful planning will ensure your deck is a source of pride and satisfaction for a long time.

Look at many examples created by top architects and designers.  After looking at the photos and drawings of different types of decks you’ll have a clearer understanding of the deck design process and its possibili­ties whether you go on to design your own deck or turn your notes and sketches over to a professional deck contactor, you will be on the right track.

Is It Time For A New Roof?

A new roof is every homeowners most dreaded home improvement task. Lots of homeowners want to renovate their kitchens or bathrooms, but no homeowner wants to install a new roof. If the roof over your head lasts as long as you own the home, all the better. But that is not always the case. Every 20 or 30 years, sometimes sooner, homes need their roofing either replaced or reinforced.

A homeowner that suspects it is time to install a new roof needs to be sure. In this homeowner’s guide to residential roofing, you will learn some of the basic symptoms of a roof in need of replacement. Followed by that will be a brief outline of the work necessary to properly install a new roof, including the extensive preparations. Also covered are some of the roofing features available like a drip edge and an ice shield. Let’s get to it.

How do you know if it’s time for a new roof?
If your roof is leaking it will be obvious. Stains on the ceiling inside are a tell tale sign. Sometimes, though, a leak in the roof can be repaired locally without the entire roof being replaced. For the big picture, look for a combination of factors including the following:

*Algae growth – Airborne algae produce a dark discoloration on the roof that resembles soot or dirt.

*Curling, blistering, or missing shingles – These can be caused by moisture, poor workmanship, or high winds.

*Damaged flashing – This is caused by drying or cracking on an old roof, improper nailing, or settling of the home over time.

*Buckling – Buckling can happen when the house settles, if new shingles are applied over old ones, or because of poor workmanship. Poor workmanship includes improperly applied felt, wrinkeld underlayment, or lack of spacers between the roof deck and boards.

*Missing granules – Granules naturally wear off of shingles, but if there are so many loose granules that they are filling up your gutters or if the mat underneath is exposed, then your shingles have officially gotten too old.

*Signs of rot – This is more common in organic base shingles. Consider replacing with fiberglass shingles to avoid rot.

What does it take to install a new roof?
A good roofing crew will have a system in place when you order your new roof, including preparation. Without undergoing significant preparation, a homeowner risks the integrity of their new roof. If a roof is poorly prepared, it will quickly develop crack, holes, and eventually leaks.

Typically, the team will take up most of your yard, laying out the new roofing materials. Also they usually pull a dump truck up to the side of the house to throw in all of the old roof detritus that will be torn off and trashed. If you cringe at the thought of a heavy dump truck crushing your lawn, ask your roofer about a new technology called Mr. Buggy, which is a great dump truck alternative. The team will remove all the old shingles and pull out the old nails. At this stage it is time to replace or secure the roof boards. Each roof board should be inspected individually to ensure the future integrity of the new roof.

All debris must be removed from the roof at this point, because demolition will be over. It will be time to begin the actual installation portion of the roofing project. Next the team must install an aluminum drip edge along the eaves of the roof using galvanized nails to prevent rust. After the drip edge, it is wise but not necessary to install an adhesive ice and water sheild. This can be expensive but it is well worth it in wet or cold climates. Some states’ building codes require the ice and water shield, so do your homework.

Then the team will entirely cover the roof area with felt or roofing paper in overlapping rows from the bottom up, fastening it down with roofing tacks. Finally the new shingles are attached, from the bottom corner of the roof up to the very top. Any hips and valleys are overlapped, using a herringbone technique.

It’s over now. Congratulations!

Roofing is arduous work, requiring lots of manpower, that is best handled by professionals. Roofing requires a significant amount of demolition and preparation before the familiar shingles or shake are fastened down. It sounds simple here, but it takes days, and it is a very dirty and labor intensive job. The good news is that when the roof is done, it looks so ordered, fresh and beautiful that the whole house seems to smile to be wearing a new top. And as a homeowner, you are allowed decades of cozy security under a healthy new roof.

Need More Space? Clean Out The Attic For Some Much Needed Room!

Remodeling the attic is a resourceful and imaginative way to increase the usable space of a home without building additions or making significant structural changes to the house. The first step of any attic remodeling project is a thorough assessment. If your attic has enough room for you to stand up in without bonking your head on a rafter, that is a good start. Read this attic renovation primer to learn some basic inspections you will need to do before planning to remodel your attic.

Inspecting your attic includes making sure there is enough clearance to create a livable space up there. Inspect the ceiling joists and framing to make sure they are structurally sound. The ceiling joists are the wooden beams you have to stand on when you go up into your attic. These will become the support for any flooring you install in the attic. The ceiling joists must be a minimum of 2″ by 6″. If the joists are any smaller, they will not support the weight of the remodeled attic and it will crash down onto the rest of the home.

Make sure there is enough space to renovate the attic. Eight feet of clearance from the joists to the roof is a minimum standard. Also, depending on the pitch of the roof, the roof itself needs to be a certain width to justify the renovation. If the pitch of the roof is 1/2, then the roof needs to be at least 40 feet wide. If the pitch is 2/3, the roof needs to be 32 feet across. A 5/6 pitch requires a roof at least 24 feet wide for a satisfactory attic renovation.

Next, have an electrician inspect your home’s wiring to establish if your current electrical system can handle the load of an additional livable room, accounting for all the lighting and appliances you will add to the renovated attic.

Also, look for any leaks or damage in the roof that will need to be fixed during the renovation. Once finished with the initial inspection, it will be time to formulate a plan.

Once you have preformed the initial assessment on your attic, you will be able to decide for sure if you are going to renovate. If your attic is a good candidate for remodeling, your renovation plan needs to include some essential points. These essential points are: access, HVAC, flooring, and light.

Access
Most attics are accessed through a fold down lumber stairway or a ladder through a trap door. At best, the attic is reached by a cramped staircase that does not allow for normal foot traffic. Your renovation plan must make allowance, both spatially and economically, for a standard staircase from the living space in your home up to the proposed living space in your attic. Study your local building codes concerning egress in living spaces. For example, your renovated attic will need to have at least one window installed that will act as a fire escape.

HVAC
HVAC is an industry acronym that stands for Heating, Ventilation, and Air Conditioning. Attics are typically heavily insulated for the sake of the entire home’s energy conservation. This mean attics are very hot in the summer and very cold in the winter. Your renovation plan must account for these unique temperature ranges in the new attic. Your homes HVAC system will need to be expanded to accommodate and appropriately ventilate your remodeled attic.

Flooring
Since the majority of attics do not have a real floor, one will have to be installed. The “floor” of most unrenovated attics consists of nothing but the tops of the ceiling joists of the room below, usually with insulation laid down between the joists. If your attic is being used for storage, you likely have random boards laid across the joists for places to step and keep boxes of Christmas decorations and whatnot. Think about what kind of flooring you will use in your new attic. Make sure flooring is both glued down and thoroughly secured with fastening hardware to prevent squeaking down the line. Carpet is a good flooring option for attics, because it insulates and dampens sound. But carpet must be reinforced with high quality carpet padding and a secure base flooring.

Light
Attics are dark places. When renovating your attic draw up plans for adequate lighting. Electrical lighting is not your only option. If you install a skylight or dormers, the attic will be flooded with beautiful quantities of natural light during the day. Since the space is small relative to the rest of the home, paint the walls a light color to reflect illumination and help the natural light fill the room more effectively.

In the end, an attic renovation can be a wonderful thing. What matters most before beginning an attic renovation plan is adequate preparation. Find a reputable contractor that is willing to answer your questions. Inspect your attic for basic structural integrity and minimum clearance. Then work with a contractor and a design team to draw up a sound attic remodeling plan. Before you know it, you’ll be playing billiards in your new attic hobby room. Good luck!

Spruce Up That Old Basement For Some Much Needed Room!

As a family grows they need more space. The basement is a valuable and large source of space that is frequently overlooked by homeowners. Often when homeowners need more space in their homes they consider knocking out a wall or building an addition to their homes. What many homeowners fail to capitalize on is the significant amount of additional space that is already built into the house, space that few use to its full potential. That space is the basement.

A remodeled basement can drastically increase the amount of livable space inside of a home. A properly remodeled basement can serve any number of functions from a recreation room, laundry room, guest room, home theater, or even your own personalized sports bar. Why take a cab home from the local pub when you can just take the stairs?

Walls
Most basements have bare concrete or cinder block walls. You will need to finish the basement walls with a material of your choosing. Walls are a necessity for many reasons. Walls over the default brickwork create a more natural look to the new basement, covering exposed wiring, water pipes, and joists. Walls also provide much needed insulation. Moreover, walls create spaces to install electrical outlets, which will be a legal and practical necessity regardless of the planned usage.

Lighting
Typical basements come with very little lighting, often little more than a bare bulb with a string switch. Bear in mind, your new basement will be need to be better lit than the rest of your home, because of the absence of natural light. Lighting can be maximized by strategically adding windows or mirrored surfaces to your basement remodel plan.

Flooring
The poured concrete floor of your current basement will not do. The pores in concrete draw loads of moisture into the basement. Consider the many choices of floor coverings available for your basement. Carpet and hardwood are not recommended because they will react poorly to the moisture in the basement. Vinyl, stone and laminate flooring are better choices because they are resistant to moisture and they are easy to heat. It is wise to install electric floor heating in your renovated basement to combat the high moisture levels.

This list is not exhaustive by any means, but you cannot successfully renovate your basement without these basic considerations. Now that you are equipped with information, it’s time to do some homework. Find a reliable local contractor with a design team and ask some questions. Learn about your local building codes to see what you will have to do during the course of your project to make your basement safe and sound in the eyes of the law. Before you know it, you will be ready to get started. With the right design team, you can turn what was once an auxillary storage space into a cozy and inviting human habitat.

If you decide to remodel your basement, be sure to do the proper planning and preparing. When a home is originally erected, the basement is never intended to be a functional living space. To make it so, the designer will have to make some significant modifications to ward against darkness, moisture and cold. But if approached by a knowledgeable designer, making a basement livable is a welcome and rewarding challenge.

This brief basement remodeling guide will outline some of the essential considerations a homeowner must make before beginning a basement remodeling project. Once you are acquainted with some of the major obstacles in front of you, you will be better equipped to begin planning your basement remodel. Five essential considerations to make when assessing your basement are: moisture, usage, walls, lighting, and flooring.

Moisture
Moisture is the make-or-break factor of a basement. By virtue of being underground, all basements collect moisture. Some basements collect so much moisture that renovation is impractical or impossible. Examine your basement for significant moisture. Significant moisture means that water is actually pooling and/or dripping into your basement. If your basement is too moist, it is not a candidate for renovation and you can save yourself a lot of time by quitting while you are ahead and looking into that ground level addition project.

Usage
What do you want to use your new basement for? This is one of the most fun parts of a project. Pre-visualize the basement as it would appear after the remodel. Are you interested in building a home theater? If so, how many seats and where will you put them? Do you need a play room for the kids so you can have a little more peace and quiet upstairs? The way you choose to use the new basement will have the most affect on any subsequent design decisions. For example, if you include a guest room in your basement plan, building codes require that you equip the basement with an new exit in addition to the door that leads back into the home.